The current Public Switched Telephone Network is a robust and fairly bulletproof system for delivering phone calls. Phones just work, and we’ve all come to depend on that. On the other hand, computers, e-mail and other related devices are still kind of flaky. Let’s face it — few people really panic when their e-mail goes down for 30 minutes. It’s expected from time to time. On the other hand, a half hour of no dial tone can easily send people into a panic. So what the PSTN may lack in efficiency it more than makes up for in reliability. But the network that makes up the Internet is far more complex and therefore functions within a far greater margin of error. What this all adds up to is one of the major flaws in VoIP: reliability.

VoIP technology uses the Internet’s packet-switching capabilities to provide phone service. VoIP has several advantages over circuit switching. For example, packet switching allows several telephone calls to occupy the amount of space occupied by only one in a circuit-switched network. Using PSTN, that 10-minute phone call we talked about earlier consumed 10 full minutes of transmission time at a cost of 128 Kbps. With VoIP, that same call may have occupied only 3.5 minutes of transmission time at a cost of 64 Kbps, leaving another 64 Kbps free for that 3.5 minutes, plus an additional 128 Kbps for the remaining 6.5 minutes. Based on this simple estimate, another three or four calls could easily fit into the space used by a single call under the conventional system. And this example doesn’t even factor in the use of data compression, which further reduces the size of each call.

Chances are good you’re already making VoIP calls any time you place a long-distance call. Phone companies use VoIP to streamline their networks. By routing thousands of phone calls through a circuit switch and into an IP gateway, they can seriously reduce the bandwidth they’re using for the long haul. Once the call is received by a gateway on the other side of the call, it’s decompressed, reassembled and routed to a local circuit switch.

If you’ve never heard of VoIP, get ready to change the way you think about long-distance phone calls. VoIP, or Voice over Internet Protocol, is a method for taking analog audio signals, like the kind you hear when you talk on the phone, and turning them into digital data that can be transmitted over the Internet.

How is this useful? VoIP can turn a standard Internet connection into a way to place free phone calls. The practical upshot of this is that by using some of the free VoIP software that is available to make Internet phone calls, you’re bypassing the phone company (and its charges) entirely.